Read this first: these are national ranges from published cost guides. We haven't collected enough Dayton quotes to give local numbers, so we're not pretending to. Ask for the price before work starts.
Air conditioner prices
| Job | Typical range | Source |
|---|---|---|
| Diagnostic visitThe visit to find out what is wrong | $75–$200 | HomeAdvisor AC repair, 2026 data |
| Typical AC repairMost homeowners pay about $417 | $172–$664 | HomeAdvisor AC repair, 2026 data |
| Capacitor replacementA small, common failure | $120–$475 | HomeAdvisor AC repair, 2026 data |
| Refrigerant rechargeThe leak, if any, is a separate job | $100–$600 | HomeAdvisor AC repair, 2026 data |
| Refrigerant leak repairFinding and fixing the leak | $225–$1,600 | HomeAdvisor AC repair, 2026 data |
| Blower motorMoves the air through the house | $250–$2,000 | HomeAdvisor AC repair, 2026 data |
| Evaporator coilThe indoor coil | $600–$2,000 | HomeAdvisor AC repair, 2026 data |
| CompressorThe big one on an older unit | $1,200–$2,800 | HomeAdvisor AC repair, 2026 data |
| Labor, after hoursRegular labor is $75–$150 an hour | $160–$250 an hour | HomeAdvisor AC repair, 2026 data |
| New central ACDepends on house size and ductwork | $2,500–$7,500 | HomeAdvisor AC repair, 2026 data |
Furnace prices
| Job | Typical range | Source |
|---|---|---|
| Typical furnace repairAverage $318; the full professional range is $64–$1,475 | $133–$505 | HomeAdvisor furnace repair, updated June 20, 2026 |
| Flame sensorA small sensor part | $150–$250 | HomeAdvisor furnace repair, updated June 20, 2026 |
| IgnitorLights the burner | $150–$500 | HomeAdvisor furnace repair, updated June 20, 2026 |
| Gas valveControls the gas to the burner | $200–$600 | HomeAdvisor furnace repair, updated June 20, 2026 |
| Blower motorMoves the warm air through the ducts | $150–$2,000 | HomeAdvisor furnace repair, updated June 20, 2026 |
| Heat exchangerAsk the company to show you what it found | $100–$1,500 | HomeAdvisor furnace repair, updated June 20, 2026 |
| Yearly tune-upChecks the system before winter | $125–$200 | HomeAdvisor furnace repair, updated June 20, 2026 |
| New furnace, installedAverage about $4,814; removing the old unit is $60–$330 | $2,823–$6,897 | HomeAdvisor furnace replacement, updated June 17, 2026 |
Sources: HomeAdvisor AC repair (2026 data), HomeAdvisor furnace repair (June 20, 2026) and HomeAdvisor furnace replacement (June 17, 2026). None of these are Dayton quotes.
What pushes a Dayton bill up
A house older than the equipment

Two in three Dayton homes were built before 1960, and the median home was built in 1951 (Census ACS 2024). Tell the company the age of your house and whether it has ducts. An older house can need duct changes, and that is the kind of thing that moves a replacement quote.
A hot afternoon
When the muggy season peaks in July (15.1 muggy days on average, per Weather Spark), every shop is busy. After-hours labor is listed at $160 to $250 an hour against $75 to $150 in regular hours (HomeAdvisor AC repair). A spring tune-up is a smaller bill than an emergency in July.
The permit
The City of Dayton says new HVAC work, or changes to it, needs a permit (city page; Building Inspection 937-333-3883). Ask whether the quote includes the permit and who pulls it.
The refrigerant
You can keep repairing a system that already uses R-410A. New R-410A residential AC units can't be imported starting January 1, 2025 (EPA), so ask which refrigerant a new system uses.
Ask these before the work starts
- Say what the unit is doing, how old it is and where the thermostat is set.
- Ask whether there's a diagnostic fee and whether it comes off the repair.
- For anything over a few hundred dollars, get the price in writing.
- For a replacement, ask for two quotes and the size calculation behind each one.
- Get the company name and Ohio license number and look it up on the state's eLicense page.
Furnace down? Read the furnace guide.